The bleeding and venting valve EB 3.50
is a float-controlled start-up bleed valve. Its body is made of steel whilst the internal components are manufactured from stainless steel featuring excellent corrosion resistance. The float is precisely guided in the outlet spigot. The valve cone is fitted with a soft seal. The minimum pressure required for valve sealing is 0.3 bar. If small air volumes have to be bled during continuous operation, a dual bleed valve should be used.
Thanks to the large cross-sectional area of the seat these valves are capable of handling large air volumes at low pressures. They close as soon as the system is filled with fluid. When the liquid level drops these valves will only open if the system is depressurised; they will not open under working pressure.
- High pressure resistant welded construction
- Body made of steel
- Soft seal
- Stainless steel body
- Float adjustment to the density of the medium
- Rubber or plastic coating for corrosive fluids
- Various seal materials suitable for your medium
- Aseptic or ANSI flanges, welding spigots .....
- EnBW
- E.ON
- BASF
- Uniper
- Oiltanking
- Brunei Fertilizer